Teflon tape), heat gun or lighter, #29 and #10 drill bit, electric drill, anti-seize, ruler or straightedge, timing light, and a utility knife. 999-810 w/power steering & AC 999-811 w/power steering, w/o AC 999-813 w/o power steering, w/AC TOOLS REQUIRED: 8mm, 10mm, 12mm, 14mm (deep), 16mm, 17mm, and 7/16” sockets, (2)12mm, a 14mm, 15mm, 17mm, 22mm (or adjustable wrench), a 1/2", and 7/8” combination wrenches, 5mm allen wrench, multipurpose pliers, needle nose pliers, wire cutters, wire crimpers/strippers, (2) needle nose locking pliers (Vise Grips), hose cutter, stubby and medium flat blade screwdrivers, #2 and #3 phillips screwdrivers, dead-blow hammer, torque wrench, thread sealing tape (i.e. In addition, you should save the parts that will not get reused in case you ever have reason to convert the engine back to stock. It is recommended that you make space for those that you will reuse, and a separate space for those that you will not reinstall.
#Miata powercard free
During this installation process, you will reuse some parts or hardware and not reinstall others. Huge selection of Miata parts and accessories for your Mazda MX-5 Miata Home About Us FREE Shipping. Also, if your fuel filter has more than 40,000 miles on it since it was replaced last, it is recommended that you replace it. Run any lower octane gasoline out of your tank and refill with 91 octane before starting this install. WARNING: 91-octane gasoline (or higher) is required when running a supercharger. Use your discretion- if you are not a competent mechanic, do not attempt this installation. SPECIAL NOTE: Moss Motors Supercharger Systems are designed to be installed by individuals with good mechanical skills and with the proper tools. The TDR Gen 3 Fuel Card is a great fuel management solution for all forced induction Miatas running up to 12 PSI.
#Miata powercard serial
Be certain to do this now because once your supercharger is installed, it may be difficult to see the serial number. Write down all of the numbers which appear on that label in the appropriate space on the warranty card.
#Miata powercard serial number
ATTENTION SUPERCHARGER INSTALLER! Before proceeding with the installation, it is important to know that to validate the 2 year, 100K warranty on your new supercharger, you must completely fill out the Moss Motors warranty card that comes in every kit, including the serial number which is on a small white ‘bar code’ label on the body of the supercharger. We suggest that as you proceed through the installation, you should read a few steps ahead in the instructions so that you are certain to catch all notes and warnings. Miata MP62 Supercharger System Installation Instructions FOR 1999 - 2000 Miata READ THESE INSTRUCTIONS THOROUGHLY! Follow the instructions STEP-BY-STEP, and your installation will be trouble free.
0 kommentar(er)
